NCP1568PDUHD90WGEVB 是一块 90W TYPE-C PD3.0 / QC4.0 电源适配器开发板，其主要设计特色是采用了安森美半导体的电源管理芯片组合。初级侧功率级有3颗芯片分别是NCP1568主动箝位反驰式控制芯片、 NCP1622 CrM VSFF PFC控制芯片、 NCP51530 高速半桥MOSFET驱动芯片; 次级侧功率级搭配的是NCP4306 同步整流控制芯片。根据开发板测试结果显示，高达91%的电源转换效率有效地将交流电转换为直流电，同时由于开关损耗大大减少，组件尺寸也有效的缩小，实现更高的功率密度(1.27W/cm3)。 

  大大通精彩博文    安森美半导体NCP1568PDUHD90WGEVB 开箱文

这台电源适配器支持 USB-C PD (5V/3A, 9V/3A, 12V/3A, 15 V/3 A, 20V/4.5A)

• Universal AC Input Range (90 – 264 Vac)
• <75 mW Standby (5 V & 230 Vac) Power Consumption with No Cable Plug In
• High Efficiency at Full Load
• Inherent SCP and OCP Protection
• Quick Switching Off FET while unplugging Cable and Switching On FET at Vbus dropping to 5 V while plugging Cable again
• Optional Boost follower PFC Control
• Active Clamp Flyback Topology with Peak Current Mode Control
• High Frequency Operation
• High Power Density (1.27 W/cm3)
• Support TYPE−C PD3.0 & QC4.0,QC4.0+,PPS Protocol
• Adaptive Output OVP and UVP
• Two Stage OCP for 15 V and 20 V Output
• Open Loop Protection
• Compact Profile with Board Size 63 x 63 x 21 mm

https://www.onsemi.cn/support/evaluation-board/ncp1568pduhd90wgevb